Specs:
| Shipping Time: | Ships in 5-15 business days |
| Style: | Raised Square |
| Face Frame: | 3/4″ x 1-3/4″ Birch |
| Door Frame: | Premium HDF (HDF is used to avoid cracking/warping) |
| Door Center: | Premium HDF (HDF is used to avoid cracking/warping) |
| Sides: | 1/2″ A-Grade Plywood |
| Top & Bottom (Wall): | 1/2″ A-Grade Plywood |
| Bottom (Base): | 1/2″ A-Grade Plywood |
| Back Panel: | 1/2″ A-Grade Plywood Full Back |
| Shelves: | Adjustable 3/4″ w/Front Edge Banding |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | 5/8″ solid hardwood, dovetailed drawer box, 5/16″ Plywood Drawer Box Bottom, 5-Piece drawer front construction |
| Drawer Glides: | Undermount, Full Extension, Soft Close Glides |
| Base Corner Supports: | 3/4″ Solid Wood Corner Blocks |
| Overlay: | Full |
| Hinges: | 6-way Adjustable, Concealed, European Soft Close Hinges |
| Cabinet Interior: | UV Coated Natural Interior (Prepped-for-glass cabinets will be finished to match the cabinet fronts) |
| Center Stile: | None (unless listed in the cabinet description) |
| Assembly Method: | Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats – not already installed on the cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Glued, clips will not be used |
| Finish: | 7 step, acid-catalyzed finish process with a UV coating and brushed glaze |
| Toe Kick: | 1/2″ Plywood |
| Installation Rail: | None |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Doors come pre-drilled for the hinges, the face frame has marks where to drill and the customer chooses Right or Left during assembly. |
| Toe Kicks Included w/Base Cabinets: | Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8′ toe kick) is needed if cabinets are next to each other. |
| Sides Panels Finished: | Yes |
| Installation/Design Note: | The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4″) which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
